3 axis VMC
HAAS VF-3-R
| TRAVELS | S.A.E | METRIC |
|---|---|---|
| X Axis | 40.00 in | 1016 mm |
| Y Axis | 20.00 in | 508 mm |
| Z Axis | 25.00 in | 635 mm |
| Spindle Nose to Table (~ max) | 29 in | 737 mm |
| Spindle Nose to Table (~ min) | 4 in | 102 mm |
| SPINDLE | S.A.E | METRIC |
|---|---|---|
| Max Rating | 20.0 hp | 14.9 kW |
| Max Speed | 7500 rpm | 7500 rpm |
| Max Torque | 75.0 ft-lbf @ 1400 rpm | 102 Nm @ 1400 rpm |
| Max Torque w/opt Gearbox | NA | NA |
| Drive System | Belt Drive | Belt Drive |
| Taper | BT40 | BT40 |
| Bearing Lubrication | Air / Oil Injection | Air / Oil Injection |
| Cooling | Liquid Cooled | Liquid Cooled |
| TABLE | S.A.E | METRIC |
|---|---|---|
| Length | 48.0 in | 1219 mm |
| Width | 18.0 in | 457 mm |
| T-Slot Width | 5/8 in | 16.00 mm |
| T-Slot Center Distance | 3.15 in | 80 mm |
| Number of Std T-Slots | 5 | 5 |
| Max Weight on Table (evenly distributed) | 3500 lb | 1588 kg |
| FEEDRATES | S.A.E | METRIC |
|---|---|---|
| Max Cutting | 650 ipm | 16.5 m/min |
| Rapids on X | 1000 ipm | 25.4 m/min |
| Rapids on Y | 1000 ipm | 25.4 m/min |
| Rapids on Z | 1000 ipm | 25.4 m/min |
| AXIS MOTORS | S.A.E | METRIC |
|---|---|---|
| Max Thrust X | 2550 lbf | 11343 N |
| Max Thrust Y | 2550 lbf | 11343 N |
| Max Thrust Z | 4200 lbf | 18683 N |
| TOOL CHANGER | S.A.E | METRIC |
|---|---|---|
| Type | Carousel | Carousel |
| Capacity | 20 | 20 |
| Max Tool Diameter (full) | 3.5 in | 89 mm |
| Max Tool Weight | 12.0 lb | 5.4 kg |
| Tool-to-Tool (avg) | 4.20 s | 4.20 s |
| Chip-to-Chip (avg) | 4.50 s | 4.50 s |
| GENERAL | S.A.E | METRIC |
|---|---|---|
| Coolant Capacity | 55 gal | 208 L |
| AIR REQUIREMENTS | S.A.E | METRIC |
|---|---|---|
| Air Required | 4 scfm @ 100 psi | 113 L/min @ 6.9 bar |
| ELECTRICAL SPECIFICATION | S.A.E | METRIC |
|---|---|---|
| Input AC Voltage (3 Phase) - Low | 200 VAC | 250 VAC |
| Input AC Voltage (3 Phase) - High* | 380 VAC | 480 VAC |
