HAAS VF-2-I-R
| TRAVELS | S.A.E | METRIC |
|---|---|---|
| X Axis | 30.00 in | 762 mm |
| Y Axis | 16.00 in | 406 mm |
| Z Axis | 20.00 in | 508 mm |
| Spindle Nose to Table (~ max) | 24.0 in | 610 mm |
| Spindle Nose to Table (~ min) | 4.0 in | 102 mm |
| SPINDLE | S.A.E | METRIC |
|---|---|---|
| Max Rating | 30.0 hp | 22.4 kW |
| Max Speed | 10000 rpm | 10000 rpm |
| Max Torque | 90.0 ft-lbf @ 2000 rpm | 122.0 Nm @ 2000 rpm |
| Drive System | Inline Direct-Drive | Inline Direct-Drive |
| Taper | BT40 | BT40 |
| Bearing Lubrication | Air / Oil Injection | Air / Oil Injection |
| Cooling | Liquid Cooled | Liquid Cooled |
| TABLE | S.A.E | METRIC |
|---|---|---|
| Length | 36.0 in | 914 mm |
| Width | 14.0 in | 356 mm |
| T-Slot Width | 0.626 in to 0.630 in | 15.90 mm to 16.00 mm |
| T-Slot Center Distance | 4.92 in | 125 mm |
| Number of Std T-Slots | 3 | 3 |
| Max Weight on Table (evenly distributed) | 3000 lb | 1361 kg |
| FEEDRATES | S.A.E | METRIC |
|---|---|---|
| Max Cutting | 650 ipm | 16.5 m/min |
| Rapids on X | 1000 ipm | 25.4 m/min |
| Rapids on Y | 1000 ipm | 25.4 m/min |
| Rapids on Z | 1000 ipm | 25.4 m/min |
| AXIS MOTORS | S.A.E | METRIC |
|---|---|---|
| Max Thrust X | 2550 lbf | 11343 N |
| Max Thrust Y | 2550 lbf | 11343 N |
| Max Thrust Z | 4200 lbf | 18683 N |
| TOOL CHANGER | S.A.E | METRIC |
|---|---|---|
| Type | SMTC | SMTC |
| Capacity | 30+1 | 30+1 |
| Max Tool Diameter (full) | 2.5 in | 64 mm |
| Max Tool Diameter (adjacent empty) | 5.0 in | 127 mm |
| Max Tool Length (from gage line) | 11 in | 279 mm |
| Max Tool Weight | 12.0 lb | 5.4 kg |
| Tool-to-Tool (avg) | 2.80 s | 2.80 s |
| Chip-to-Chip (avg) | 3.60 s | 3.60 s |
| GENERAL | S.A.E | METRIC |
|---|---|---|
| Coolant Capacity | 55 gal | 208 L |
| AIR REQUIREMENTS | S.A.E | METRIC |
|---|---|---|
| Air Required | 4 scfm @ 100 psi | 113 L/min @ 6.9 bar |
