Phillips Compact Mill - PCM 220

1
Phillips Compact Mill - PCM 220
Phillips Compact Mill - PCM 220
DESCRIPTION UNIT STANDARD METRIC OPTIONAL
TRAVELS METRIC  
X Axis 220 mm  
Y Axis 120 mm  
Z Axis 200 mm  
Spindle Nose to Table (~max) 230 mm  
Spindle Nose to Table (~min) 30 mm  
SPINDLE METRIC  
Max Rating 2.2 kW ER20 4 kW ISO 20
Max Speed 10,000 rpm std (24,000 rpm Optional) 40,000 rpm 1.6 Nm
Max Torque 2.39 Nm Integrated
Drive System Integrated ISO 20
Taper ER20 GREASE
Bearing Lubrication GREASE 10 mm
Max. Tool Dia. 12 mm Water Cooled
Cooling Water Cooled  
TABLE METRIC  
Length 300 mm  
Width 165 mm  
T-Slot Width 12 mm  
T-Slot Center Distance 45 mm  
Number of Std T-Slots 3  
Max Weight on Table (evenly distributed) 30 kg  
FEEDRATES METRIC  
Rapids on X 8 m/min  
Rapids on Y 8 m/min  
Rapids on Z 8 m/min  
CONTROLLER Mitsubishi M80B Mitsubishi M80A, FANUC 0iMF PLUS
GENERAL METRIC  
Instructions ISO G Code  
Coolant Capacity 18 L  
AIR REQUIREMENTS METRIC  
Air Required 28 L/min @ 4.8 bar  
Inline Air Hose 10 mm  
Coupler (Air) 10 mm  
Air Pressure Min 5.5 bar  
DIMENSIONS - SHIPPING METRIC  
Domestic Pallet 170 cm x 165 cm x 220 cm  
Export Pallet 170 cm x 165 cm x 220 cm  
Weight 600 Kg  
ELECTRICAL SPECIFICATION METRIC  
Input AC Voltage (3 Phase) 415 VAC  
Full Load Amps (3 Phase) 16 A  
Total Load 9 KVA  
Input AC Voltage (3 Phase) - Low 200 VAC  
Full Load Amps (3 Phase) - Low 8 AMP  
TOOL CHANGER METRIC  
Type Manual Carousel
Capacity   8
Max Tool Weight   1.5 kg
Tool-to-Tool (avg)   24 sec
UPGRADES METRIC  
4TH AXIS - Platter Dia. 80 mm  
4TH AXIS - No. of T-Slot 4 @ 90°  
4TH AXIS - Centre Height 65 mm  
5TH AXIS - Platter Dia. 80 mm  
5TH AXIS - No. of T-Slot 4 @ 90°  
5TH AXIS - Platter Face Height 104 mm  
5TH AXIS - Tilting Angle ±90°